Your smile can be redesigned.
Your smile can be redesigned. This is the subject of Aesthetic Dentistry. According to research results, laughing is the best medicine both for having good health and for good work performance.
A beautiful appearance and smile
A beautiful appearance and a smile lead to an increase in positive feelings and thoughts towards that person. This also contributes to the increase of a person's self-confidence. A person becomes at peace and happy with himself.
Self-assured
Self-confident people also develop spiritually. Their creativity develops. The light of a beautiful smile makes a lot of difference to relationships.
* If you are not satisfied with your smile
* If you don't think your smile reflects you
* Or if you want your smile to reflect you differently (more sexy, feminine, masculine, childish...)
* If you feel the need to cover your mouth with your hand while laughing
It is the easiest and cheapest method that we will resort to when we feel that we need a more beautiful, bright smile. Most of the time, even anesthesia is not needed.Problems caused by the color and position of our teeth are easily solved. Adhesive systems are used. It has been used for at least 5 years without problems. When there is a problem, it can be repeated again without damaging the tooth at all. With quality materials and competent dental service, the results are very natural and aesthetic.
It is a method that we will use if we are satisfied with our smile but not satisfied with the color of our teeth. It is easier and cheaper than large aesthetic initiatives.
Research has shown that applications performed under the supervision of a dentist are safe and effective. It does not damage the teeth and gums. Only slight cold-heat sensitivity may be observed during treatment.
The application is of 2 types;
a) Household Type: The doctor takes oral measurements and prepares silicone dental molds. With this, he gives the patient the bleaching medicine. The patient puts the medicine into this mold and uses it for 6-8 hours a day for about a week. At the end of the application, the teeth will be whitened.
b) Clinic Type: The whitening drug is applied to the tooth by an experienced physician. White light is applied on this drug with beam devices specially prepared for this issue. As a result of this procedure, tooth whiteness is observed immediately.
Depending on the type of coloration, the experience of the physician, the patient's conditions, one of these methods is chosen.
If the habits that can change the color of the teeth back to their former bad color continue (intensive consumption of tea, coffee, tobacco, wine ...), consolidation treatment may be required every six months.
The application of the whitening system consists of several simple stages. They are as follows:
Research has shown that applications performed under the supervision of a dentist are safe and effective. It does not damage the teeth and gums. Only slight cold-heat sensitivity may be observed during treatment.
Lips and gums are covered with a special material.
Whitening gel is applied on the teeth. The gel activated by "special light" descends into the inner layers of the tooth and destroys stains.
This 15-minute application is repeated 3 times.
The gels are cleaned and whitening is checked.
Usually, a 45-minute office application allows the teeth to be opened between 8 and 10 Decals. However, it is supported with the household type in necessary cases.
In addition to office-type bleaching, household bleaching is also performed on mouths that are not suitable for office-type October. For this application, plaster models are obtained by taking a special measurement of your teeth first. Then, very thin transparent silicone molds suitable for your teeth are prepared by the laboratory. In a home-type application, the application is performed during the day or at night when going to bed, depending on the duration of the application. On average, Decals should remain in the mouth for between 2-6 hours. If whitening is performed using only the household type, the teeth will be noticeably whitened within 7-14 days. In applications made as an aid to the office type, use between 3-6 days is sufficient. Dec. Teeth whitening will only be effective on your own teeth. It does not affect porcelain coatings and fillings.
Areas Where It Is Used:
Broken teeth
Teeth with a lot of substance loss due to caries
Colored teeth
Incorrectly positioned teeth
Implant superstructure
Compensation of pulled dental cavities
Closure, function and phonation disorders
There are a lot of material options in the construction of crowns and bridges. The material is decided according to the dose of image, function, gingival position, aesthetic expectation.
It is the application of porcelain on a metal floor. The metal can be standard or precious alloy. Precious metal can be preferred in terms of tooth, gingival harmony, not showing allergic reactions. Standard metal is a more economical choice.
The biggest advantages of metal supports are their colors, light reflection and vivid appearance. Since there is no metal under them, the reflection is very natural, like teeth. There will also be no gray image on the edges of the gums. Even if the gums are pulled out, they look very natural.
Another advantage over metal supports is the way they are glued. While the bonding of metal supports can only be done mechanically, they have both mechanical and chemical adhesion.
There is also no risk of allergies that may be against metal in metal-supported porcelain in such crowns.
Under porcelain, zirconium alloy is used instead of metal. Its advantage compared to others is that it is easily used in rear area bridges due to the fact that it is a very durable material. In other words, it carries all the positive properties of metal while also carrying the positive properties of non-metal porcelain.
Areas Where It Is Used:
The problem with the laugh line
Crowding
Material losses that cannot be compensated by filling
Discoloration that cannot be handled by the bleaching process (caused by the use of antibiotics or fluoride, caused by systemic diseases ...)
The Decussation between the teeth (Diastema)
Saggy gums
Broken or worn teeth
It is one of the easiest methods to use in the above cases. 0.3-0.7 mm etching is performed only from the front surfaces of the teeth. The back areas remain completely natural. Porcelain plaques, which are finely prepared with a very sensitive work in the laboratory, are applied to the mouth with a very sensitive bonding technique again.
Because their light transmittance is very high, they look very natural and alive. Their adhesion to the tooth is both mechanical and chemical. They can be used easily for many years.
Because it is a very shiny surface, the dye is not affected by food at all, it always retains its first color. There will also be no formation of tartar on it.
The only disadvantage is that it is a more expensive method compared to other aesthetic applications. Due to the fact that it is a very sensitive application, the doctor and dental technician must be very knowledgeable and experienced. In addition, having an eye for art will also contribute to the result.
In the anterior region, it is the process of attaching imitation stones in the appearance of diamonds to the surface of a tooth that you want in a very short time. During this procedure, no etching is made on the tooth. The stone is glued to the surface of the tooth through a special type of filler. It can be easily removed when it is wanted to be removed, and there is no need to perform a separate application on your tooth after removal. It is also possible to attach it by etching from the tooth to make it more conservative and permanent, but in this case, this area must be closed with a filling when the stone is removed. Removing the substance from the tooth for an aesthetic application is not a method that we recommend very much. Since aesthetic stones sit on the surface of the tooth, they are likely to come out with any hard force, but in this case they can be easily reattached by the dentist.
They are porcelain crowns and bridges without metal inside. Zirconium, a white alloy, is used as the substructure of porcelain. Its advantages over metal-supported crowns and bridges are as follows:
Due to the fact that it is a very durable material, it is easily used safely in the back areas and on long bridges.
Due to the lack of metal in its substructure, it refracts light like a natural tooth. For this reason, they are much more aesthetic studies.
Since only the zircon is left on the edge of the crown or bridge in contact with the gum, a more perfect result is obtained in terms of aesthetics and health.
Although there is a possibility that the metal support may cause allergies in the gums, there is no allergic reaction to zircon in the body.
It is an element that is resistant to high temperature, impact, lightweight, does not conduct heat and electricity.
It does not lead to taste disorders in the mouth, gum problems and bad breath.
Cercon ceramics placed on the zirconium infrastructure reduce the rate of adhesion of food residues and micro-organisms to the tooth surface.
The places where it is used are:
a) In single tooth crown restorations
b) On long bridges
c) In the work of the crown and bridge on the implant
d) In cases where maximum aesthetics is desired